100W Hot Glue Gun with 11mm Glue Stick Slot - Fast-Heating DIY Craft & Repair Tool

Product Features:

1. This series of products is suitable for rubber strips with a diameter of 11mm.

2. Insert the rubber strip into the glue gun from the end, feed it into the barrel, plug in the power, and preheat for 3-5 minutes. Press the trigger to extrude the melted glue and control the amount of adhesive.

3. During use, if you cannot finish a roll of tape in one go, there is no need to remove the tape. You can first plug in the power and preheat for 3-5 minutes, then use it directly. ’

4. This glue gun only requires 3-5 minutes of preheating time. The product undergoes prolonged thickening heating, achieving rapid de-adhesion within 15 seconds, with a maximum operating temperature of 150°C. This outperforms over 90% of traditional glue guns. Thanks to an advanced heating system, it preheats faster, enhancing dispensing efficiency.

5. Quick unloading, extremely fast dispensing speed, smooth and continuous adhesive application. Features a copper nozzle for smooth and continuous adhesive flow, durable and rust-resistant. The nozzle protection cover design prevents burns from high temperatures. The glue gun can dispense 0.07 ounces/2 grams of adhesive per minute.

Product specifications:

Material: Plastic and alloy

Operating power: 100W

Operating voltage: 100–220V

Operating temperature: 180°C

Nozzle diameter: 0.070–0.078 inches

Preheating time: 3–5 minutes

Colour: Black

Rubber rod diameter: 11x150mm

Specifications: European/American standards

Product Dimensions: 220 x 190 mm

Included Items:

Hot melt glue gun x 1

Notes:

1. To prevent burns, do not touch the adhesive solution flowing from the gun.

2. To ensure smooth operation, preheat the glue gun for approximately 3–5 minutes before use (preheating time).

3. Once the adhesive rod is in use, it cannot be removed.